Intern

Day/Date: Fri, 29/3, 9am-7pm Venue: StickerPro My office Activities:  Today (Day 113) I added cutline to customer's artwork and then I printed them half in mirrorcoat stickers which were paper based and water resistant and half in transparent stickers which were waterproof as requested by customer. Then, I also added cutline to another customer's artwork so that I can cut out the decals after printed the artworks.

Day/Date: Thurs, 28/3, 9am-5.10pm Venue: StickerPro My office Activities:  Today (Day 112) I designed balloon for happy birthday dear wife. After customer confirmed the artwork, I cut them out. I also added design as per requested from customer by adding Whatsapp qr code, telephone number and also Instagram link. After artwork confirmed by customer, I printed and cut out the decals. Last, I told the customer their stickers were ready to collect after done.

Day/Date: Wed, 27/3, 9am-5pm Venue: StickerPro My office Activities:  Today (Day 111) I cut out glossy mint colour artworks for customer. First, I traced the image from customer and cut it into half and then copied and flipped it so that it was balanced. After that, I also helped customer to add new telephone number on her artwork then I confirmed the artwork with her. After confirmed, I printed and cut out the decals.

Day/Date: Tue, 26/3, 9am-5pm Venue: StickerPro My office Activities:  Today (Day 110) I did artwork creation for height 200cm. After confirmed with customer, I cut out the decals. After that, I put transfer tape and teared off once before sending to the customers. I also did artwork creation for customers that did it before. I put the wording she needed and showed her the artworks. After confirmed, I printed out them in PVC paper that is waterproof.

Day/Date: Mon, 25/3, 9am-5pm Venue: StickerPro My office Activities:  Today (Day 109) I did a mock for a company to choose the colour they want. After that, I cut out gold decals. After removing the unusable part, I put a transfer on it. Then, I make sure the decals stuck on the transfer tape so I teared out it once. Last, I informed customers their mock is ready to be picked up.

Day/Date: Fri, 22/3, 9am-5.15pm Venue: StickerPro My office Activities:  Today (Day 108) I cut out the decals into pieces. Then, I started to iron them down on the t-shirt. I put the decals at a suitable place and place a curtain on top on it, then I used the machine to heat them down. I repeated the process for others t-shirt. After cooling down, I teared off the transfer tape. After that, I also reheated them for 5 more seconds to make sure the decals stuck on the t-shirt. Last, I folded them up and packed them to be delivered to customers.

Day/Date: Thurs, 21/3, 9am-7pm Venue: StickerPro My office Activities:  Today (Day 107) I printed out customer's artwork. The artwork is printed out in art card and backside also have artwork. Therefore, I arranged them neatly so that it can fit both front and back. After printed front and back, I cut them out using cutting machine with different knife so that they can be cut off. After that, I laminated them using laminating film by another machine. Last, I pounced hole on suitable places.

Day/Date: Wed, 20/3, 9am-5.25pm Venue: StickerPro My office Activities:  Today (Day 106) I printed out customer artworks using art card. The back sides were also printed with pink colour. Then, I changed the machine's knife and added passes to make sure the decals will be cut off and cut to size. After that, I also did sticker type stickers. When cutting out the decals, I copy and paste the outside so that the machine will cut the outside many times so that it will cut off while the inside will only cut once.

Day/Date: Tue, 19/3, 9am-5.50pm Venue: StickerPro My office Activities:  Today (Day 105) I printed and cut out decals from customer artworks. All of them had been added stroke so that the decals can be cut out correctly. Then I also traced, divided, merged and offset path customer's artwork so that I can cut the artwork to size.

Day/Date: Mon, 18/3, 9am-5.30pm Venue: StickerPro My office and Smuk Living (HAY) Activities:  Today (Day 104) I went installation with my boss. First, we installed some cut out decals on the glass windows. Second, we installed the wall stickers on the backdrop. As it was big, therefore it was seperated into two, so we join them up carefully. Third, we installed foamboard stickers with double side tape on the wall. Last, we also helped the owner to install wordings that were bought by themselves.

Day/Date: Fri, 15/3, 9am-5.55pm Venue: StickerPro My office and Deemcee Office  Activities:  Today (Day 103) I went installation with my boss and my colleagues. First, we installed the blue sticker, then we used marking to join the others. After all has been installed, we teared off the transfer tapes and also the markings. I learned to cut off half of the stickers using letter cutter so that it was easy to install the long stickers. After confirmed the last position of stickers with customer, we installed all of them and put on the small decals free hand. Last, we cleaned up all of the waste and leave.

Day/Date: Thurs, 14/3, 9am-5.20pm Venue: StickerPro My office Activities:  Today (Day 102) I designed balloon for happy birthday. I adjusted the size to meet the customer requirements. Then only I cut out the decals. After that, I also clipping mask the QR code from the artworks that has been printed out stuck in customer's glass window. As the artworks is in one-way vision, it was formed by dots therefore the QR code cannot be scanned. So we replaced it with new one.

Day/Date: Wed, 13/3, 9am-6.30pm Venue: StickerPro My office Activities:  Today (Day 101) I cut out decals for balloon. The artworks was in pdf form therefore when it was placed in AI, I needed to release clipping mask and adjusted the artwork so that it can be easier to cut out. After that, I also printed and cut out decals because when using cut out, the decals were difficult to be teared out.

Day/Date: Tue, 12/3, 9am-5.10pm Venue: StickerPro My office Activities:  Today (Day 100) I designed the artworks and then arranged 3 design in an A3 size paper. I adjusted the colour so that it will similar to the sample given. Then I printed them out using hologram stickers that has been cut in A3 size. After that, I cut out the decals and replaced the broken one. Last, I told customer to collect their stickers.

Day/Date: Mon, 11/3, 9am-6.30pm Venue: StickerPro My office Activities:  Today (Day 99) I traced an artwork from customer image because customer wanted to redo for new van stickers. I searched tamil font from Internet and traced from it, because tamil font in Ai is less and need  to adjust some settings. After that, I seperated the artworks to cut out different colours stickers. Then, I also helped my boss for the installation.

Day/Date: Fri, 8/3, 9am-6.10pm Venue: StickerPro My office and Section 19, Petaling Jaya  Activities:  Today (Day 98) I traced the artworks of a pdf to get the shape of the circle and also added stroke to the decals. Then I printed out the decals and did matte lamination. After that, I cut out the decals. I also cut out the wording using different colours stickers. Besides that, I also adjusted customer's artwork in Canva to fix the glass door. It printed out one-way vision. I did these installation stickers with my boss and also my colleagues.

Day/Date: Thurs, 7/3, 9am-5.10pm Venue: StickerPro My office Activities:  Today (Day 97) I download customer's artwork to make decals. First, I released the clipping mask as they were in pfd form, then I make the cut line that requested by customer. As the original artworks were more bigger so I didn't added stroke. After that, I printed out the quantity needed and cut out the decals using cutting machine.

Day/Date: Wed, 6/3, 9am-7.10pm Venue: StickerPro My office Activities:  Today (Day 96) I download customer's artwork and put down marking that needed to be cut. Then, I print them out using art card. After that, I cut them out manually. I learned how to use another machine to do a straight line so that it can be flipped easily and also a dotted line so that it can be teared off.

Day/Date: Tue, 5/3, 9am-5.05pm Venue: StickerPro My office Activities:  Today (Day 95) I designed foamboard for customer's birthday. First, I created the shape of the foamboard and put pink colour. Second, I found a suitable Disney font for the wordings. Third, I followed the customer sample to put princesses with transparent background on the bottom and then a castle at the back, and also stars surrounded them.

Day/Date: Mon, 4/3, 9am-6.40pm Venue: StickerPro My office Activities:  Today (Day 94) our regular customers wanted to cut out the same decals and needed many pieces. However, this time no need lamination so after I printed out the artworks, I joined them together. Then I used the cutting machine to cut out the decals. Then, me and also my colleagues teared out the unusable part and cut them into pieces. We filtered out the disabled stickers and replaced with new one. After done, we send them to our customers.

Day/Date: Fri, 1/3, 9am-5.40pm Venue: StickerPro My office Activities:  Today (Day 93) I added customer's company name, phone number and address into her artworks. Then, I printed and cut out the decals. Besides that, I also cut out frosted stickers according to the size as customer needed them to stick on the glass windows. Me and my colleagues cleaned up the glass windows and stuck the frosted stickers on them together.