Intern

 

Day/Date: Tue, 16/4, 9am-5.10pm Venue: StickerPro My office Activities:  Today (Day 123) I traced image from internet for the logo. Then, I adjusted to the size needed by customer and then cut out. Besides that, I also type the code needed by customer and arranged them one by one in A3 size. After that, I print and cut out the decals.

Day/Date: Mon, 15/4, 9am-6.30pm Venue: StickerPro My office Activities:  Today (Day 122) I cut out 2cm round hologram stickers for customer that needed 200 pieces. Then I also cut out hologram stickers with artworks that needed 2800 pieces. After confirmation with customer, I printed out the artwork on hologram stickers that has been cut into A3 size. As hologram stickers were reflective, therefore I printed and cut out the marking to stick on the hologram stickers. After cut out, I informed the customer to come and pick up.

Day/Date: Fri, 12/4, 9am-5.55pm Venue: StickerPro My office Activities:  Today (Day 121) I designed two happy birthday balloon for customer. After confirmation, me and my colleagues cut out the decals and teared off the unusable part before sending it to customer. Then, we also cut out decals for another artworks. After putting marking at the artwork, we cut the decals using different colours. Then, we used marking to join them up. After joining, we teared off the marking and put on transfer tape for customer.

Day/Date: Tue, 9/4, 9am-6.50pm Venue: StickerPro My office Activities:  Today (Day 120) I designed happy birthday balloon for customer. Then, I also adjusted customer's artwork in Canva and confirmed with the customer. After customer satisfied, I clipping mask the artwork which is in PDF form in AI. After that, I arranged the artwork in A3 size and then calculated the quantity to make sure it is corrected as proposed to customer. Last, I printed and cut out the decals.

Day/Date: Mon, 8/4, 9am-7.30pm Venue: StickerPro My office Activities:  Today (Day 119) I did the stickers for Rockiss. After adding stroke at the artworks from customer and arrange them in A3 size, I printed and cut out the decals. After that, I also put cut line on vouchers' artwork and then printed them out on simili paper. I then manually cut them out. Moreover, I also printed out artcard that have 2 side and then cut them out. After that, I put them in laminated paper and went through the lamination machine. Then, I punched hole at the top. Lastly, I checked the defected stickers and replaced them with new one. I wrapped them up and sent it to customer.

Day/Date: Fri, 5/4, 9am-7.10pm Venue: StickerPro My office Activities:  Today (Day 118) I also continued the previous process like, print, arrange and stapler the booklets. Besides that, I folded the paper into half after my boss cut them into the size. After that, me and my colleagues packed them up in a plastic where each of them had 20 booklets. Then, we used trolley to send them to customer's office.

Day/Date: Thurs, 4/4, 9am-6.50pm Venue: StickerPro My office Activities:  Today (Day 117) I also repeated the process of printing booklet for the next 200 sets. Me and my colleagues in charge of different task to make the things easier. We also changed the toner frequently as the toner has been finished by the printing of the booklets. Besides that, we also clear the rubbish tank for the printer. Moreover, we will pull the drum for the colour to be more balanced.

Day/Date: Wed, 3/4, 9am-7.45pm Venue: StickerPro My office Activities:  Today (Day 116) me and my colleagues also continued printed the booklets. After 300 sets done, I arranged them according to the pages. Then, I also helped in stapler the booklet using stapler machine.

Day/Date: Tue, 2/4, 9am-6.50pm Venue: StickerPro My office Activities:  Today (Day 115) I also involved in the printing simili paper for the booklet. Besides that, I also printed out the cover page which was 260gm and one side matte lam. Therefore, after printed out the cover page with art card, I laminated one side of the art card with the lamination machine. Me and my colleagues also worked overtime to complete the printed amount we set.

Day/Date: Mon, 1/4, 9am-7.15pm Venue: StickerPro My office Activities:  Today (Day 114) I helped to print out A3 saddle stapler booklet which needed 500 books. I put the 80gm simili on the printer to print the booklet. I doubled check the printed out colour while flipped the paper to the back to print another pages. I also checked the range to avoid printed wrongly. I repeated these process until me and colleagues complete the numbers we set.