Intern

Day/Date: Thurs, 30/11, 9am-5.40pm Venue: StickerPro My office Activities:  Today (Day 34) I printed out cat stickers that needed for animals event on Saturday. Since the file received was in pdf form so I needed it two times bigger so that the print out decals will be high resolution. I leraned how to use Adobe photoshop to adjust the contrast so that the back images can be seen. Besides that, I also learned that I can call grab to collect things from our customers to our office. Since we missing our old file so we sent grab to collect the sticker the customer want to print and adjusted the colour based on the stickers received as last time my company print the wrong colour. In this situation, I have learned how to adjusted the cmyk.

Day/Date: Wed, 29/11, 9am-6.20pm Venue: StickerPro My office Activities:  Today (Day 33) I and my colleagues continued with the yesterday job. Then we cut the decals which arranged in neated form into pieces. We also put them into heater machine so that the transfer tape will be more sticky to stick the decals out and made the work more easier for our customers. Two heater machines has been used so that the works can be done faster. Lastly, we calculated the quantity to make sure all the pieces needed is correct and we wrapped them all in a plastic and sent it to our customers.

Day/Date: Tue, 28/11, 9am-5.50pm Venue: StickerPro My office Activities:  Today (Day 32), all day I cut out decals for a company logo with different heights and different pieces which is a big work as it needed many pieces.  First, I arranged the artworks and calculated how many pieces of the arranged decals needed to be cut. Then I used 2 cutting machines to cut the decals so that the work could be done faster. After the decals has been cut, I removed the unwanted decals and put transfer tape on them with the helped of my other colleagues. I repeated the same process the whole day.

Day/Date: Mon, 27/11, 9am-6.30pm Venue: StickerPro My office Activities:  Today (Day 31) I designed wording for grand opening balloons. Then I cut out the decals using gold colour stickers. Besides that, I also helped to reply WhatsApp messages. Moreover, I cut a red sticker into half with my colleagues so that it can fixed the cutting machine. The sticker is red orafol which is made in Germany where it will be used to cut out a company logo that needed many pieces. 

Day/Date: Fri, 24/11, 9am-5.10pm Venue: StickerPro My office Activities:  Today (Day 30) I learned bleeding so that the cutting machine won't cut the artworks when it is not in its correct position. It was adding stroke so that it won't affect the artworks. I also learned how to use offset so that it can be placed out of line. Besides that, I also helped to print out decals.

Day/Date: Thurs, 23/11, 9am-5.10pm Venue: StickerPro My office Activities:  Today (Day 29) I designed a balloon for congratulations on grand opening. Other than that, I also designed for wording thank you. Moreover, I helped the others to trace image from customer's artworks and helped to open invoices.

Day/Date: Wed, 22/11, 9am-5.05pm Venue: StickerPro My office and sneakerse care Activities:  Today (Day 28) I put a square on each of the name that needed to be cut out as nametag. After that, I put them on A3 size transparent so that they can be cut out as one transparent sticker for each name. Besides that, I also help for the installation of lift stickers in Sri Hartamas for sneakerse care.

Day/Date: Tue, 21/11, 9am-6.10pm Venue: StickerPro My office & Shell Jalan Cheras  Activities:  Today (Day 27) I helped the installation of transparent stickers on shell with all of my colleagues. All of us cooperated to completed this installation. First, we sprayed the soapy water on the shell pump and sticker so that it is not sticky and easy to adjust. After it stuck at the position, we removed the water so that the stickers will be stuck on the shell pump. We repeated the process for 12 pump.

Day/Date: Mon, 20/11, 9am-7.00pm Venue: StickerPro My office Activities:  Today (Day 26) I helped to cut out the artworks that needed to be heated on t-shirts. After it stuck on the t-shirt, I helped to tear out the stickers and folded the t-shirts. Besides that, I cut out the oracle transparent stickers into half and helped to cut the artworks that needed to be installed by tomorrow. I grouped them up accordingly as the stickers were big.

Day/Date: Fri, 17/11, 9am-7.10pm Venue: StickerPro My office Activities:  Today (Day 25) I recreated the booth stickers for a company as their file got problems. I learned how to use adobe photoshop to adjust the brightness and selective colour. I also learned how to created wanted shape and well-used of clipping mask, contrast in adobe illustrator. I also cut out the oracle black and white stickers into half so that it's suitable to use for the cutting machine.

Day/Date: Thurs, 16/11, 9am-6.15pm Venue: StickerPro My office Activities:  Today (Day 24) I arranged the artworks in A3 paper and then printed out with registration mark. After that, I cut out the decals using cutting machine with the used of registration mark. Then I teared out the unusable part and replaced them with the extra one. PVC sticker is plastic based, waterproof while mirrorcoat sticker is paper based, water resistant. Moreover, I also placed the transparent stickers on a card using water with soap so that it's not sticky and easy to move and place. Then I remove the water so that it will stuck on the card.

Day/Date: Wed, 15/11, 9am-7.15pm Venue: StickerPro My office Activities:  Today (Day 23) I managed to completed the needed 20k stickers with the helped of others colleagues. I had printed out the stickers needed to be stuck on laptop and teared out the unusable part. I also designed balloons for happy birthday using different kinds of front.

Day/Date: Tue, 14/11, 9am-6.25pm Venue: StickerPro My office Activities:  Today (Day 22) I continued to tear out the stickers which is in A3 form and then remove and replace the spoiled stickers. After that, I cut the A3 stickers and put it into a plastic. In the meantime, I also let the cutting machine cut out the stickers and repeatedly. Besides that, I also helped to cut the other stickers. I also managed to use back my computer and learn how to save and share the files and projects through one drive.

Day/Date: Fri, 10/11, 9am-6.40pm Venue: StickerPro My office Activities:  Today (Day 21) I designed balloon for 11th wedding anniversary with snoopy. I helped to move my computer to the other side so that it can connect to the cutting machine as the old one has been affected by ransome ware. Then I helped to tear out the stickers which is in A3 form and remove the spoiled stickers. I replaced them with new stickers and then cut the A3 paper in pieces. Besides that, I also helped the others with the cut out decals. 

Day/Date: Thurs, 9/11, 9am-6.15pm Venue: StickerPro My office Activities:  Today (Day 20) I helped to solve the corrupted unopened ai file. Then I helped to stick together the stickers which is in A3 form then I rolled them up so that it is easier to cut when it put at the cutting machine. I also helped to create invoices.

  Day/Date: Wed, 8/11, 9am-5.10pm Venue: StickerPro My office Activities:  Today (Day 19) I learned how to stick the stickers on acrylic. I spread water with soap on the acrylic and sticker so that they are not sticky. After that, I adjusted the sticker to fixed its position. Then I only used a swiper to remove the water. Last, I removed the transfer tape and the stickers stuck on the acrylic. I also helped to print out decals that needed 20k stickers.

  Day/Date: Tue, 7/11, 9am-5.30pm Venue: StickerPro My office Activities:  Today (Day 18), I designed balloon stickers for a baby dragon’s happy birthday. I learned that gloss stickers are quite difficult to stick on transfer tape, as they are sticky, so I needed help from my colleagues. I also completed other cut-outs and printed those decals.

Day/Date: Mon, 6/11, 9am-5.20pm Venue: StickerPro My office Activities:  Today (Day 17), I designed balloon stickers for a boy’s birthday celebration. I also did my things as usual. Besides that, I learned that matte lamination on printed stickers can make the stickers smooth and clear. I became more familiar with the cutting machine to cut out the stickers. I also helped to sort out the usable stickers.

Day/Date: Fri, 3/11, 9am-5.30pm Venue: StickerPro My office and Setia Alam residence area Activities:  Today (Day 16), I helped to cut out the design that had been printed out using a cutter knife, as the design was big. Then I was involved in the installation with my boss at the Setia Alam residence area. Besides helping others with the tear-out stickers process, I also printed out and cut out decals. I made sure all the things had been completed and the stickers had been collected before leaving.

Day/Date: Thurs, 2/11, 9am-6pm Venue: StickerPro My office Activities:  Today (Day 15), I learned how typesetting works and how the artwork can fit in one A3 paper, as our printing is in A3 size. After that, I put the design and registration mark into it and printed it using transparent and mirror coat paper. Then I cut out the artwork using a cutting machine with the help of the registration mark. Besides that, I also helped the others while I was free.

Day/Date: Wed, 1/11, 9am-6.45pm Venue: StickerPro My office Activities:  Today (Day 14) I designed balloon stickers for welcoming a baby boy. I also cut out a decal for an aircaft model. Besides that, I checked for the invoice that hadn’t been paid. I also helped the others with their work.